In the spring of 2022 release the ellipse compartmentation family has been changed to a 7-point adaptive compartment.

Start by checking the length of the curved wall, and notice the height of the wall.

Note: If the architect used "Attach top/bottom" functionality, the Unconnected height will be incorrect.

Note: The Adaptive compartmentation will not appear with legend tool, manually place the requirement of the ordinary compartmentation family if necessary.


----------------------------------------------------------------------------


The family requires 7 points to be placed, it's possible to trace the center of the wall for placing centrical. 


----------------------------------------------------------------------------

Change the Fire_Top parameter to the wall height. Note that the adaptive compartmentation is not connected to the wall.


----------------------------------------------------------------------------


Use Connect family to manually connect the family to the wall. Fire_GUID is now not empty.


----------------------------------------------------------------------------

Repeat with all the curved walls which needs to have fire requirements.